Details 24v 50w heater cartridge
Voltage: 24v 50w heater cartridge
Heating head size: 6 * 20mm
Heating head material: 304 stainless steel
Line length: 1M and 2M for option
Line thick: 0.5 mm⊃2; (The cross section of the copper wire inside the heater is 0.5mm⊃2;)
Color: as shown in the picture
Heating temperature: up to 350 degrees
From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful. From the original 40W power to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃ or so.
The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life. Support the customization of different specifications, length, resistance of the heater. Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).
Overview heater cartridge
Installing your new 50W heater cartridge on your 3D printer’s hotend is simple, and Slice Engineering designed it that way, whether you have their Mosquito Hotend or Mosquito Magnum Hotend or not. The 1.2 meter cables easily reach the control board of any 3D printer, even large format ones. The leads of this heater cartridge can be cut to length to accommodate your 3D printer’s connector.
The 24v 50w heater cartridge of power output into this heater cartridge also translates into faster heating and faster printing, so you can unlock a whole new world of engineering-grade plastics that other off-the-shelf desktop printers can’t come close to.
Things like Nylon, Ultem, PEEK, and other plastics you always wanted to use for molds, medical devices, end use parts, or automotive components are now within your reach. Take the raw power of your 3D printer to the next level with this simple plug-and-play modification. Designed for effortless use, implementation, and reliability. Use in conjunction with Slice Engineering Boron Nitride Paste for the highest accuracy results.
Some 3D desktop printers are capped at a certain temperature for safety reasons, and the manufacturer won’t lift it. Check with your printer model to see if it allows you to print at your desired temperature.
Like upgrading the engine in your car, suddenly an unsuspecting machine can compete with the top of the line. The 50W Heater Cartridge takes your 3D printer and opens a whole new world of engineering-grade plastics that other off-the-shelf desktop printers can’t come close to. Materials like Nylon, Ultem, PEEK, and other plastics you always wanted to use for molds, medical devices, end use parts, or automotive components, they are now well within your reach.
Take the raw power of your 3D printer to the next level with a simple plug and play modification. Designed for effortless use, implementation, and reliability. We use 1.2 meter cables that make it easy to reach the control board of even the largest printer, and with long bare leads, it can be installed in many more 3D printer models.
High performance, high temperature, 50 watt cartridge heaters made to Slice Engineering’s specifications. Overall length: 22 mm. Diameter sized fit into a 6 mm H7 toleranced hole. Molex connectors. Leads are 1 m in length. Available in 24V.
We inspect the outer diameter of our cartridge heaters with a full-length “go” ring gage to ensure the outer diameter does not exceed the maximum material condition envelope. Beware loosely toleranced cartridge heaters that will not provide a close fit in a heater block.
This 24V 50W Mosquito Heater Cartridge is a powerful but compact little heating unit that has been designed specifically to accommodate the impressive new Mosquito Hotend, comfortably offering heating capabilities up to around 350°C in open-air systems, and as high as 400°C in enclosed chambers. This is enough to really start taking on those engineering-grade plastics like Nylon, Ultem and even PEEK Filaments, opening up even more opportunities for using your 3D Printer for functional prints.
Although this heater cartridge is primarily stocked to accommodate the Mosquito Hotend, it can be used just as easily for almost any other Heater Blocks that have a 6mm diameter and 22mm long bore. However, just remember that this heater cartridge is 24V DC, so it’s important to make sure that this matches up with your 3D Printer’s electrical specifications.
If you’re looking for a great upgrade to your 3D Printing material capabilities, or are looking to replace an old or faulty heater cartridge but are looking for something better to swap in, there are few Heater Cartridges that can quite compare to the Mosquito 24v 50w heater cartridge – especially if you are looking forwards to printing high-temp engineering grade materials.
This heater cartridge works at it’s optimal capabilities when used in conjunction with Boron Nitride Paste, which is an extremely effective thermal coupling paste that can easily handle temperatures up to 1000°C.
24v 50w heater cartridge – HOME PAGE