Feature 32mm carburetor
Universal modifications. Quicker acceleration 32mm carburetor
Saves fuel. Best sales service
Body branding:ZSDTRP PWK. Make: Universal. Model: All models
Year: All years. Style: Flat slide TM series carburetor
Fits on Type B 2T 4T,Type A Type Y 4T 50cc to 1000cc engines (1/2/4 cylinder motors are universal). Keihin Koso and ZSDTRP are the same models, only the carburetor body branding is different. You can purchase a carburetor 50cc higher or lower than your original to save gas and ride faster.
TM32-1 32mm TM Mikuni Carburetor Review
The TM32-1 is supplied with the following factory jetting installed:
Pilot jet 45 (VM22/210), Needle 5P17, Needle Jet Q-2 (389 Series), Main Jet 250 (4/042), Air Jet none, Slide 4.0 (832-39012)
Dimension A= 40mm, B= 83mm, C= 160mm, D= 58mm, Total Width 78mm
Unlike many motorcycle manufacturers’ purpose modified versions, these factory TM Round Slides are both 2 and 4 stroke compatible and are regarded by the factory to be the best performing version of this carburetor ever made.
Mikuni’s (flat slide) 32mm carburetor, the Mikuni TM Series Carburettors provide significant performance improvements over older round slide carburetors. Air flows faster and smoother through the TM Series venturi due to the flat slide design and the jet blocks which help create smooth bore effect.The high velocity of the air flow means a stronger vacuum at the needle jet providing more precise metering and better throttle response.
Performance features for the TM Series Carburetors include a large selection of bore sizes for increased fuel mixture flow to match engine modifications. And the TM Series offers a wide range of tuning components to allow precise fuel mixture metering in any application, at any throttle setting, under any riding conditions.
Tuner jet kits can be purchased separately for many different motorcycles as per the corresponding options. These kits consist of the suggested jets for changing that are not matching those factory fitted in the TM32-1, they include an extra one size up and one size down main jet for tuning the main circuit due to fuel quality variations, altitude and climate. Testing and conformation of correct main circuit jetting can only be done by physically changing jets and WOT testing.
These tuner jet sets have been determined from thirty years of experience, customer feedback, plus research and development as the Australian Mikuni distributor. From time to time these may not be exactly right for every engine, usually due to changes to porting, compression or numerous other things that contribute to the requirement for additional fine tuning but as a rule our kits are spot on or a very close and useful starting point, but we give no guarantees and sorry do not release kit details or jet size information.
If you have your own spec simply purchase the carb and buy any other required jets from the jet pages. This also applies to replacing jets in other TM32’s as the 389 series needle jet and others items may not match and fit.
Keep in mind that these are suggested specs, and all tuning procedures, as found in our Tuning Tips section must be adhered to for the confirmation of any supplied jet’s compatibility with your engine.
(The picture with the cable shows the required length of inner cable protrusion and securing fitting at the carb end on basically a minimum length adjustment. The back board is divided into 1 and 10mm increments)
All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure.
Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. 32mm carburetor or on their behalf by the Postal Service, who you will need to make contact with using the provided tracking number.
Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply.
Mikuni Quick Action Throttle with 2-1 Cable assy VM & TM carbs
This Quick Action MX throttle and cable assembly is for use with Mikuni VM carbs ranging from VM26 through to VM38 and all TM non pump Mikuni carburetors excluding the TM24.
These premium grade cables use a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance.
All throttle cables must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with water proof grease.
If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1.
This effectively washes away dirt from the cable, without clogging it.
Designed for use with Mikuni VM26, VM28, VM30 , VM32, VM34, VM36, VM38 and also TM28, TM32, TM34, TM36, TM38 32mm carburetor
Designed to open up to 38mm carburetors with aprox a 1/4 turn
Black Die-cast aluminum Throttle housing with high-grade chrome steel Allen-head bolts. Universal cables fit all bikes doing twin carb conversions to Mikuni VM and TM. 70 degree lower cable end fittings
Nylon lined black outer cable housing with Stainless steel upper cable fitting. Suit Triumph, Norton, Yamaha XS650, Honda’s, Kawasaki and all other classic Twins
32mm carburetor – HOME PAGE