Supra body kit australia

Supra body kit australia FRP fiber glass signatu style

Supra body kit australia

Parts included in the kit:
–Front bumper and Front add-on lip (1-piece design) – mounts to the stock front bumper.
–Rear bumper
–Sideskirts (2-piece design);
–Spoiler
–Roof car Spoiler

Body kit for Supra
Body kit for Supra

This Avalon Supra body kit australia is superior to most of the kits out there as it’s offered in 2 choices of premium materials – either in fiberglass or in carbon fiber. You won’t have to pay thousands of dollars in labor to your body shop to make it “fit”, like with any fiberglass kits. Unlike fiberglass, our parts won’t crack and will have a much longer lifespan.

Most of the original equipment bumpers are made out of ABS plastic and there’s a reason for that – parts made out of ABS plastic are very heat, chemical and impact resistant and they require the least amount of prep work prior to installation.

check price

Toyota Supra body kit australia

AusBody Works offers high quality, stylish, yet affordable ABS & Polyurethane body kits imported into Australia. We currently stock bodykits for Supra body kit australia and Toyota 86 and will be providing more kits to our range shortly.

Our Toyota bodykits are made from quality ABS & Polyurethane material and designed to fit very firmly. We are also the proud supplier of Maxton Design bodykits in Australia who have been producing stylish and popular body kits throughout Europe. 

Should you require a Toyota Supra body kit australia for a specific make and model then please contact our team and we can discuss arranging a specialised order for your car.

Overview Toyota Supra
Overview Toyota Supra

2013-2016 Toyota Subaru BRZ

This is a OE style polyurethane rear diffuser that attaches to the base of the original rear bumper of all Toyota 86 / Subaru BRZ 2013-2016 models. All mounting screws are provided.

Comes in black matte plastic colour. The rear diffuser can be used as is or painted.

Easy Installation. You will need to drill holes for all Polyurethane rear diffuser like this. Instructions not included.

We do not bend or fold our lips when we send them out. However, if you do receive your lip that is distorted because of shipping, do not panic. Please use a heat gun on the affected area and bend it back into shape. Our Polyurethane (PU) front lips have qualities that allows for bend and flex. This process is also possible by leaving it out in the sun for a couple ours prior to fitting.

If you would like to confirm you are purchasing the correct part/accessory suitable for your car, please do not hesitate to contact us.

Front Lip For JZA80 Toyota Supra body kit australia

If you’re looking for a Front Lip in V2 Style for JZA80 Toyota Supra then this is the one for you.

Tough look, plus tough construction. Give your car that aftermarket look while improving performance.

  • Front Lip for JZA80 Toyota Supra – V2 Style (1993 – 1998 Models)
  • This front lip attaches to the bottom of your standard Toyota Supra JZA80 front bar
  • Super tough Poly-Urethane construction
  • Matt black in colour
  • Front lip can be painted or left as is
  • Supplied with all screws needed to fit
  • Easy installation – Holes need to be drilled (Instructions NOT supplied – See BASIC instructions below)
  • Please allow 2-3 days for handling BEFORE this item is shipped to you
  • Custom designed to suit this model
  • Quality guaranteed
  • Tough look plus increases your cars value
Review Toyota Supra body kit australia
Review Toyota Supra body kit australia

We recommend a professional to install at all times but here’s a general installation guide:

Fit the lip onto the bumper of your car to know where and how it lines up. Once you are comfortable with how it sits you can prep for painting if needed (sanding, primer, paint etc).

We recommend you use 3M double-sided tape (not supplied) for a firm hold. Sand down the inner edges of the lip (where the lip and car will touch) and then re-clean that area using a proper wax and grease remover. Apply 3M double-sided tape to where you just sanded down and fit the lip onto the car.

After the lip is mounted, use a heat gun or hair dryer over the whole lip. The heat will help it mould onto your car for a glove-like fitment. Once you’re satisfied with how it is, use the screws provided underneath the lip and on the sides of the bumper.

Supra body kit australia FRP fiberHOME PAGE

Leave a Reply